Toshiba E-studio 200L Operator's Manual page 215

Error Code
3E20 POP3 server communication timeout
3E30 POP3 login error
3F00, 3F10, File I/O error
3F20, 3F30,
3F40
Scan Job
Error Code
SCAN TO E-MAIL
2C10, 2C12, Illegal Job status
2C13,
2C20-2C22
2C11, 2C62 Not enough memory
2C14 Invalid parameter specified
2C15 Message size exceeded limit or
maximum size
2C30 Failed to create directory
2C31, 2C33 Failed to create file
2C32 Failed to delete file
2C40 Failed to convert image file format
2C61 Failed to read AddressBook
2C63, 2C64 Invalid Domain Address
Cause & Message
Cause & Message
Corrective Action
Ask your administrator that the POP3 server
works properly and the LAN cable is
connected to the server.
Ask your administrator that the POP3 user
name and password is set correctly.
Ask the sender to resend the E-mail. If the
error still occurs, contact your service
representative.
Corrective Action
A system error has occurred during sending
an E-mail. Retry it. If the error still occurs,
contact your service representative.
Make sure there is enough memory to send
the scan job.
Make sure you specify the settings correctly
and try again.
You are sending too many documents at a
time. Send your documents separately.
Make sure that the access privilege to the
storage directory is writable and the server or
local disk has a sufficient space. Then retry the
scan.
Make sure that the access privilege to the
storage directory is writable and the server or
local disk has a sufficient space. Then retry the
scan.
Turn the power OFF and then back ON. Retry
the scan.
Turn the power OFF and then back ON. Retry
the scan. If the error still occurs, contact your
service representative.
Turn the power OFF and then back ON. Retry
the job in error. Reset the data in the Address
Book and retry it. If the error still occurs,
contact your service representative.
Ask your administrator to set the IP address.
9
213