Toshiba E-studio 200L Operator's Manual page 219

Error Code
2BC0 System fatal error.
2BC1 Failed to acquire resource.
2B60 ERRCD_SCAN_BOX_FOLDER_DUPLI
CATE
2B70 ERRCD_SCAN_BOX_DOCUMENT_DU
PLICATE
2B71 ERRCD_SCAN_BOX_DOCUMENT_EX
PIRE
2B80 ERRCD_SCAN_BOX_HDD_NEARFUL
L
2BD0 ERRCD_SCAN_BOX_RESTORE_FAIL
ED
2BE0 ERRCD_SCAN_BOX_MCNTBL_ERRO
R
2BF0 ERRCD_SCAN_BOX_MAX_PAGE
2BF1 ERRCD_SCAN_BOX_MAX_DOCUMEN
T
2BF2 ERRCD_SCAN_BOX_MAX_FOLDER
Printer
Error Code
402F PM size error
4030 No print enabler/invalid
4031 HDD full for printing
A221 Print job cancel
A222 Print Job power interruption
Cause & Message
Cause & Message
Corrective Action
Turn the power OFF and then back ON. Retry
the print. If the error still occurs, contact your
service representative.
Turn the power OFF and then back ON. Retry
the print. If the error still occurs, contact your
service representative.
Check the folder to be made.
Check the data to be stored.
Check the storage period.
Delete the unnecessary data in HDD.
Check the power cable.
Turn the power OFF and then back ON to print
again.
Reduce the pages to be inserted, and print
them.
Backup the document in the Box or the folder
to PC, or delete them.
Backup the document in the Box or the folder
to PC, or delete them.
Corrective Action
Memory full. Contact your service
representative.
Check if the print enabler is connected
properly and it is inserted securely. Or check if
the trial period is expired.
Too many jogs of Private print and Department
code print are stored in HDD. Perform the jobs
or delete them.
Print job is canceled. Retry the print.
Power failure occurred. Retry the print.
9
217