Address As A Parameter; Address Formats - Motorola MVME166IG/D2 Installation Manual

Using the 166Bug Debugger
Valid expression examples:
4
The total value of the expression must be between 0 and $FFFFFFFF.

Address as a Parameter

Many commands use ADDR as a parameter. The syntax accepted by 166Bug
is similar to the one accepted by the MC68040 one-line assembler. All control
addressing modes are allowed. An "address + offset register" mode is also
provided.

Address Formats

Table 4-1 summarizes the address formats which are acceptable for address
parameters in debugger command lines.
4-4
Expression Result (In Hex)
FF0011 FF0011
45+99 DE
&45+&99 90
@35+@67+@10 5C
%10011110+%1001 A7
88<<4 880
AA&F0 A0
Notes
shift left
logical AND
MVME166 Single Board Computer Installation Guide