Berbel BWH 60 Operating Instructions Manual page 29

Ø Insert the filter into the device from the top.
The filter is properly inserted when the lower edge
rests completely on the device.
Ø Make sure that the filter is inserted correctly.
The filter is correctly assembled. If the filter is not
correctly fitted, proceed as follows:
Ø Remove the filter.
Ø Replace the filter again.
Only in hybrid operation:
Ø Push the exhaust pipe onto the filter collar.
Ø Seal the transition between the exhaust pipe and
the guide with the help of sealing tape.
Ø Ensure that the exhaust pipe is correctly fitted.
Ø Fit the screens or other attached modifications.
Maintenance
29