Berbel BWH 60 Operating Instructions Manual page 22

Making settings in the configuration mode
Setting: turning on the automatic run-on function
As delivered, the automatic run-on function is turned
off.
If you turn on the automatic run-on function, the device
will continue to operate after it has been turned off for a
further ten minutes in the power level that was last set.
Then the device will turn off the ventilation mode.
To turn on the automatic run-on function, proceed as
follows:
Ø Turn the configuration mode on.
Ø Briefly touch the touch pad
The symbol of the touch pad
brightly lit.
The function is activated.
Ø Turn the configuration mode off.
Setting: turning off the automatic run-on function
To turn off the automatic run-on function, proceed as
follows:
Ø Turn the configuration mode on.
Ø Briefly touch the touch pad
The symbol of the touch pad
dimly lit.
The function is deactivated.
Ø Turn the configuration mode off.
22
(power level 4).

(power level 4) is

(power level 4).

(power level 4) is

Operating