Profile Switch Depending On Gsm Operator Code - Teltonika FM4200 User Manual

According to the scheme, every profile has a list of parameters. Global parameters are
common for all profiles.
Switching between profiles (changing behavior) can be performed by Profile switch
depending on GSM operator code (mostly used for roaming applications), or by Profile
switch depending on I/O event (on I/O value changing).
Profile 3 is default profile for FM4. It is always loaded on very first
startup and further profile switching is proceeded after operator scan or
I/O element changes (although device remembers which profile it used
after that).
Profile 4 is 'panic' profile for FM4. FM4 can only switch to this profile if
'panic' priority event is detected (see event configuration). There is only
one way to exit profile 4 – send a special SMS command (see SMS
Command List). All records sent while using profile 4 are marked as high
priority records.
5.8

Profile switch depending on GSM operator code

GSM Operator code profile switching is mostly used in roaming applications, when
the purpose is to have information from module both from Home and Roaming operator
network for reasonable price. This method allows you to define different module behavior in
Home network, Roaming network and unknown operator areas. See figure below for details.
Profile 1 is configured for home network. Data acquisition and send intervals are quite
frequent here. To make profile use effective, it is wise to set more optimized parameters in
roaming profile (Profile 2) – this usually includes larger coordinate recording intervals,
packets with greater number of coordinates sending, and in some cases GPRS context
available only for certain time interval. Profile 3 should not allow GPRS transfer at all and
should only send few position SMS with coordinates just to have basic idea where vehicle is
located. Profile 4 is not used.
12 Figure FM4200 profile structure
20