Teltonika FM4200 User Manual page 35

171 Geozone 17
172 Geozone 18
173 Geozone 19
174 Geozone 20
199 Virtual Odometer
240 Movement
241 Current operator code
* - CAN property length varies depending on filter settings. Data can be sent as 1, 2, 4 or 8
byte property. I.E. if FM4 is set to send only 3 bytes from CAN message data field, it will be
sent as 4 byte property to the server.
There are two types of operations with I/O elements:
• Monitoring of I/O elements status
• I/O elements event capturing
Monitoring method is used in cases when it there is need in monitoring status of I/O
element at regular records saving time.
Event capturing is used to store additional AVL packet when state of I/O element is
changing. For example Ignition on, Alarm button, over speed, External power supply
dropping, etc.
• Enabled or disabled field – allows enabling I/O element so it is added to the data
packet and is sent to the server. By default, all I/O elements are disabled and FM4
records only GPS part. It is also possible to set CAN message instead of any I/O
element – this way CAN element will be sent to the server instead of chosen
element. See CAN description below for more details.
• Priority – AVL packet priority. There are Low, High, Panic, SW21, SW22, SW23,
and SW24 priorities. Regular packets are sent as Low priority records. When low
priority event is triggered, FM4 makes additional record with indication that the
reason for that was IO element change. When High priority is selected, module
makes additional record with high priority flag and sends event packet immediately
to the server. First it tries it send using GPRS, if GPRS fails, it sends AVL packet
using SMS mode if SMS is enabled in SMS settings. Panic priority event forces
1 Event: 0 – target left zone, 1 – target entered zone
1 Event: 0 – target left zone, 1 – target entered zone
1 Event: 0 – target left zone, 1 – target entered zone
1 Event: 0 – target left zone, 1 – target entered zone
4 Available when accelerometer is enabled. Value
returned in meters.
1 Available when accelerometer is enabled. 0 – not
moving, 1 – moving.
4 Currently used GSM Operator code
35