Teltonika FM4200 User Manual page 28

GPS settings define GPS data acquiring methods and frequencies. Device is checking
if the time between last saved record and current time is equal or higher than Time based
acquire interval. If so, FM saves record to memory. If not, FM checks if the distance from
last record to current record is equal or higher than Distance based acquire interval. If so,
saves the record to memory. If not and speed is higher than 10km/h, then FM is checking if
angle difference between last record and current record is equal or higher than Angle based
acquire value. If so, saves the record to memory. This check is performed every second.
FM4200 is able to collect records using three methods at the same time: time, distance
and angle based data acquisition:
• Time based data acquiring (Min.
period) – records are being acquired
every time when defined interval of
time passes. Entering zero means that
data will be recorded as fast as
possible (every
• Distance based data acquiring (Min.
distance) – records are being acquired
when the distance between previous
coordinate and current position is
greater than defined parameter value.
Entering zero means that data will be
recorded every 0 meters (as fast as
possible – every 1 second).
• Angle based data acquiring (Min.
angle) – records are being acquired
when angle difference between last
recorded coordinate and current
position is greater than defined value.
Entering zero
acquisition depending on angle.
second).
disables data
28