D. Job Status Screen - Sharp AR-M236 Service Manual

No. Name
4 [CUSTOM SETTINGS] key
5 Numeric keys
6 [ACC.#-C] key
7 [#/P] key
8 [CLEAR] key
9 [START] key
10 [INTERRUPT] key
11 [CLEAR ALL] key

D. Job status screen

This screen appears when the [JOB STATUS] key on the operation panel is pressed.
A job list showing the current job and the stored jobs or a list showing completed jobs can be displayed.
The contents of jobs can be viewed and jobs can be deleted from the queue. The following screen shows the job queue for print jobs.
1
JOB QUEUE
COPY
SHARP001
0666211221
No. Name
1 Job list
2 Mode switching keys
3 [PRINT JOB] key
4 [E-MAIL/FTP] key
5 [FAX JOB] key
6 Display switching keys Use to change the page of the displayed job list.
7 [STOP/DELETE] key
8 [PRIORITY] key
9 [DETAIL] key
Use to adjust various settings of the machine including the contrast of the touch
panel and key operator programs.
Use to enter numeric values for various settings.
When auditing mode is enabled, press this key after finishing a job to return the
machine to account number entry standby.
Use this key to execute a job program in copy mode. The key is also used to
dial in fax mode.
Press to clear a copy number setting or cancel a job.
Press in copy mode, scanner mode, or fax mode to begin copying, network
scanning, or faxing.
Use to perform an interrupt copy job.
Resets the settings to the initial settings.
SETS / PROGRESS
003 / 000
003 / 000
010 / 000
PRINT JOB E-MAIL/FTP
3 4
Function/Operation
Shows stored jobs and the job currently being executed. Touch one
of keys 3 to 5 in the above illustration to select the type of job. The
icon next to each job name indicates the mode of the job as follows:
Copy mode
Network scanner mode
Fax mode (Send jobs)
The jobs in the job list appear in the form of keys. To give priority to a
job or pause or delete a job, touch the key of the job and then use the
key described in 7 or 8.
Use to select the job list mode: "JOB QUEUE" (Stored/currently
executing jobs) or "COMPLETE" (Finished jobs).
"JOB QUEUE": Shows jobs that have been stored and the job that is
currently being executed.
"COMPLETE": Shows the jobs that have been finished. Note that
copy jobs do not appear in this list (print job only).
Use to view the list of output jobs for all modes (print, copy, and fax).
Displays a network scanner job.
This displays stored fax jobs and the fax job currently being executed. When the fax function is installed.
Use to pause or delete a job currently being executed, or to delete a
stored job. Copy jobs and received faxes cannot be paused or
deleted with this key. Copy jobs can be canceled by pressing the
[CLEAR] key or [CLEAR ALL] key.
Select a reserved job in the [Reserve/Execution] job list and touch
this key, and the selected job will be executed by interrupting the
current execution of the other job.
Shows information on the selected job. This cannot be used for a
received fax and copy.
AR-M236/M276/M237/M277 EXTERNAL VIEW AND INTERNAL STRUCTURE 6 - 3
Function/Operation
JOB QUEUE
STATUS
PAPER EMPTY * 1
1/1
COMPLETE
WAITING
DETAIL
WAITING
PRIORITY
STOP/DELETE
FAX JOB
5 6
Printer mode
Fax mode (Receive jobs)
Note
2
7 8 9
Note
* 1 :"PAPER EMPTY" in the job status
display
"PAPER EMPTY" in the job status display
indicates that the machine is out of the
specified size of paper. Add the specified
size of paper. If the specified size of paper
is not available and you are in printer mode,
another size of paper can be loaded in the
bypass tray to allow printing to take place.
When the network scanner function is
installed.