Sharp AR-M236 Service Manual page 74

5 0
5 0
5 0
5 0
46-18
Purpose Adjustment
Function Used to adjust inclination for each exposure mode.
(Purpose)
Item Picture quality
Operation/procedure
1. Touch the item to be adjusted.
The adjustment item and the current set value are highlighted.
2. Press the [START] key.
The display is shifted to the copy menu.
3. Select the paper feed tray and the print density.
Set the exposure level with the 10-key.
4. Press the [START] key.
Copying is started.
(Auto adjustment)
Item
1 AE AE
2 TEXT Character
3 TEXT/PHOTO Character/Photo
4 PHOTO Photo
5 SUPER PHOTO Super photo
6 AE(TS) AE(TS)
7 TEXT(TS) Character (TS)
8 TEXT/PHOTO(TS) Character/Photo (TS) Level 3.0
Note: When this simulation is canceled, the display returns to the initial
menu but the machine is not reset.
46-19
Purpose Adjustment
Function Used to set the control method of the exposure mode.
(Purpose)
Item Picture quality
Operation/procedure
1. Touch the item to be adjusted.
The currently set value is highlighted beside the adjustment item.
2. Press the [START] key.
The display is shifted to the adjustment value entry menu.
3. Enter the adjustment value with the 10-key, and press the [START]
key.
When the [CUSTOM SETTINGS] key is pressed, the display returns to
the original state (adjustment item selection menu).
1
Setting
Content Default
range
1-99 50
Level 3.0
Level 3.0
Level 3.0
Level 3.0
Level 3.0
AR-M236/M276/M237/M277 SIMULATION 8 - 35
Item
1 AE MODE Auto exposure mode*
(1:EXPOSURE (1: Priority on Image quality,
2:TONER) 2: Priority on toner consumption)
2 AE STOP(COPY) Auto exposure STOP mode
(0:FIXED (COPY)
1:REAL TIME) (0: Fixed, 1: Real-time)
3 AE STOP(FAX) Auto exposure STOP mode (FAX)
(0:FIXED (0: Fixed, 1: Real-time)
1:REAL TIME)
4 AE STOP(SCAN) Auto exposure STOP mode
(0:FIXED (SCANNER)
1:REAL TIME) (0: Fixed, 1: Real-time)
* Auto exposure mode
• When SIM 26-6 (Destination setup) is changed from EX Japan to
Japan, the setup value becomes 1 (Default: Japan). If, on the con-
trary, it is changed from Japan to EX Japan, the set value becomes
2 (Default: EX Japan)
• If the auto exposure mode setup value is changed, the setup value
of SIM 46-30 (AE limit setup) is reset to the default value.
46-20
Purpose Adjustment
Function Used to set the exposure correction value of SPF/
(Purpose) RSPF for OC exposure.
Item Picture quality
Operation/procedure
1. Touch the item to be adjusted.
The adjustment item and the currently set value are highlighted.
2. Enter the set value with the 10-key.
Item Content
1 SPF EXPOSURE SPF
2 RSPF EXPOSURE RSPF
46-30
Purpose Setting
Function Used to set the AE and the limit value in AE (Toner
(Purpose) save).
Operation/procedure
1. Touch the item to be adjusted.
The adjustment item and the currently set value are highlighted.
2. Enter the set value with the 10-key.
If SIM 26-6 (Destination setup) and SIM46-19 (Auto exposure mode)
are changed, this setup is also changed to the default value accord-
ingly.
Content Default
2
0
0
0
Setting range Default
1-99 53