Installation Of Options - Sharp AR-M236 Service Manual

5) Select the type of paper that is loaded in the tray.
Touch the appropriate paper type key.
CUSTOM SETTINGS
BYPASS TRAY TYPE SETTING
SELECT THE PAPER TYPE.
PLAIN LETTER HEAD
RECYCLED COLOR
HEAVY PAPER THIN PAPER
6) Touch the [OK] key.
You will return to the tray settings screen.

8. Installation of options

A. AR-P17
(1) Parts included
PCL PWB: 1 pc.
M3 screws: 3 pcs. M3 screws with
(For installation of spring washer: 6 pcs.
the parallel and the (For installation of the
USB connectors) PCL PWB)
(2) Installation procedure
Turn off the main switch of the copier and then remove the power
plug of the copier from the outlet.
1) Remove the shielding plate.
Remove five screws and remove the shielding plate.
Screws
Screws
OK
ENVELOPE JAPANESE P/C
LABELS
TRANSPARENCY
CD-ROM: 1 pc.
Operation manual
Installation caution
sheet
Support post: 2 pcs.
AR-M236/M276/M237/M277 UNPACKING AND INSTALLATION 5 - 5
2) Cut and remove the cut-out portion from the left rear cabinet.
Cut and remove the cut-out portion from the left rear cabinet using
a tool such as nippers. (Be careful about the direction of the tool so
that the cut surface is flat.)
3) Attach the PCL PWB unit.
Attach the support post to the mounting plate of machine options.
Then connect the PCL PWB connector to the mother board con-
nector and fit the PCL PWB with the six screws with M3 spring
washer (packed with the unit).
Then, attach the parallel and USB connector portion using the sup-
plied three screws.
M3 screws with
spring washer
M3 screws with
spring washer
4) Attach the shielding plate.
Attach the shielding plate using five screws.
Screws
Screws
Cut-out portion
M3 screw
Support
post
M3 screws
PCL PWB