D. Network Scanner Function Setting Program - Sharp AR-M236 Service Manual

Key operator programs
Default settings Disable default setting changes
Interface settings Hexadecimal dump mode
I/O timeout
Parallel port emulation switching
USB port emulation switching
Network port emulation switching
Port switching method
Enable parallel port
Enable USB port
Enable network port
Enable ECP
Network settings IP address setting
(When the print
server card
installed.)
Enable TCP/IP
Enable NetWare
Enable EtherTalk
Enable NetBEUI
Reset the NIC
Initialize and/or Restore factory default
store settings Store current configuration
(When the PCL
printer expansion Restore configuration
board is installed
or the model with
the board.)

D. Network scanner function setting program

Key operator programs
Scanner settings Initial file format
(When the setting
scanner function is
valid.)
Initial quality setting
Initial resolution setting
Default display settings
The number of direct address/sender keys
displayed setting
Set value (∗: Default value)
ON / OFF∗
ON / OFF∗
1 – 999 (Increment of 1sec.) 180 (sec.)∗
(60 (sec.)∗: When the PCL printer
expansion board is installed or the model
with the board.)
Auto∗ / PostScript (When the PS3
expansion kit is installed.) / PCL
Auto / PostScript (When the PS3 expansion
kit is installed.) / PCL∗
Auto∗ / PostScript (When the PS3
expansion kit is installed.) / PCL
Switch at end of job∗ / Switch after I/O
timeout
ON∗ / OFF
ON∗ / OFF
ON∗ / OFF
ON / OFF∗
DHCP: ON∗ / OFF
ON∗ / OFF
ON∗ / OFF
ON∗ / OFF
ON∗ / OFF
Set value (∗: Default value)
File type PDF / TIFF∗
Compression mode No compression / MH (G3) / MMR (G4)∗
Pages per file ALL∗
Original image type TEXT / TEXT/PHOTO∗ / PHOTO
Exposure Auto∗ / Manual (1 / 2 / 3 / 4 / 5)
200dpi / 300dpi∗ / 400dpi / 600dpi
Condition settings∗ / Address book /
Address book (ABC) / Address book
(Group)
6 / 8∗ / 12 (pcs.)
AR-M236/M276/M237/M277 OTHERS 11 - 5
When the PCL printer expansion
board is installed or the model with
the board.
When the PCL printer expansion
board is installed or the model with
the board.
When the PCL printer expansion
board is installed or the model with
the board.
When the PCL printer expansion
board is installed or the model with
the board.
When the PCL printer expansion
board is installed or the model with
the board.
When the PCL printer expansion
board is installed or the model with
the board.
When the PCL printer expansion
board is installed or the model with
the board.
When the PCL printer expansion
board is installed or the model with
the board.
When the print server card
installed.
When the PCL printer expansion
board is installed or the model with
the board.
When the PCL printer expansion
board is installed or the model with
the board (Also displayed when the
print server card is not installed.)
To enable the changed setup, the
power must be rebooted.
To enable the changed setup, the
power must be rebooted.
When the PCL printer expansion
board is installed or the model with
the board (Also displayed when the
—
print server card is not installed.)To
enable the changed setup, the
power must be rebooted.
—
—
Reboot is required only when the
network setting is changed.
—
(400dpi: For China, Taiwan)
Remarks
Remarks