Advertisement
Fleck 7000 SXT
The display should now show H 20 as shown in picture below. This indicates the Hardness is 20 grains) Use
the UP or DOWN button to change this value to the total hardness of your water. Then press the Extra
Cycle Button once to continue when finished.
The display should now show RS SF as shown in the picture below. This indicates Reserve Selection is
Safety Factor percentage; do not change this value, and press the Extra Cycle Button once to continue.
Page 12 of 17
Copyright © 2012 Quality Water Treatment, All right reserved. rev. 4.19.2013
http:// www.Qualitywatertreatment.com
Advertisement
