Barco RLM W6 Service Manual page 44

3-4. Key in the projector IP on the web browser (the recommended web browser is IE 6.0 or
later version, the default IP is 192.168.0.100) to see the embedded webpage. The IP can be
accessed via the RS command "op net.ipaddr ?" with a terminal program.
3-5. Make sure the DHCP is "Disable", if current state is "Enable", switch it to "Disable" and
click "Save" button to save the setting.
3-6. Key in the IP address and followed by "/firmwareUpdate.htm" on the URL box as below to
activate the firmware update procedure
http://192.168.0.100/firmwareUpdate.htm
And click the "Update" button to start the firmware upgrade process.
- 44 -