Table of Contents
Advertisement
1. Firmware downloads procedure:
1-1. Connect the AC power of the projector and have the projector in standby mode.
1-2. Connect the RS-232 cable between the projector and the PC.
1-3. Open the Firmware Upgrade Tool accompanied with the firmware release.
1-4. Click the RS232 from menu to select the correct COM port number corresponding to the
connection.
1-5. Click the "Projector communication test" button for testing the communication with the
projector. If everything is OK, the following dialog box will be shown.
1-6. Click the "Open File" button to activate the file selection dialog box and select BarcoW6.txt
(or BarcoW8.txt) file under the same folder of the firmware release.
- 39 -
Advertisement
Table of Contents
