Table of Contents
Advertisement
Command
Operation
Item
0.7
f.search
REMARK: An input command will get back with "NA" when the input command is "Not Applicable" in some
specific conditions.
Note1: Not applicable in standby mode.
Note2: Not applicable in standby mode or without signal locked.
Note3: Not applicable when
Note4:
Only valid when source is one of Composite, S-Video and RGB-S.
Note5: Native aspect ratio is not applicable when zoom is set to "Zoom", Letterbox aspect ratio is not applicable
when the input format is one of formats as listed in appendix 2.
Note6:
election "Zoom" is not applicable when aspect ratio is set to Native.
S
Note7: Only applicable when
Note8: Not applicable
Note9:
pip.sel can NOT be set to 0.
Note10: Not applicable
Note11: Not applicable
Note12: Not applicable when eco.net.pow is on.
Note13: Only MCU version number will be read back in standby mode.
Note14: Not applicable when the internal pattern is displayed.
Note15: The summation of the absolute value of h.keystone and v.keystone should not be greater than 350.
Barco RLM W6 Operation Commands
Commands
= ?
picture mute is on.
source is one of RGB D-15, YUV1 and RGBHV/YUV2.
when color space is set to custom.
when pip is off.
when lamp is cooling.
Values
0 = F1 Search
1 = F2 Search (default)
- 63 -
Notes
Advertisement
Table of Contents
