Table of Contents
Advertisement
E). Lamp Replacement
The lifecycle of ordinary projection lamp typically lasts for 1500 hours before requiring
replacement (different lamp configurations will affect lamp life). From the OSD Menu, you can go
to LAMPS
Lamp1 or 2 Run Time to check how long a lamp has been used. You should also replace the
lamp when the projected image gets noticeably darker. Contact your local dealer to purchase new
certified lamps for your projector.
To replace the projector lamp
Step1:
Turn off the projector and unplug the power cord. Let the projector cool for
approximately 15 minutes before removing the lamp module for replacement.
When you turn off the projector, the lamp inside the projector will still be very hot (approximately 200 ~ 300°C).
If you attempt to replace the lamp without allowing the projector to cool, you could risk scalding yourself. This
is why you should wait for no less than 15 minutes for the lamp to cool down in order to perform the
replacement safely.
Step2:
Loosen the Lamp cover.
Loosen the 2 screws
- 10 -
Advertisement
Table of Contents
