Table of Contents
Advertisement
IMPORTANT: We do not recommend that this appliance is
connected to an extension lead.
Before first use maintenance wash
o When
your
washer
recommend that you perform a maintenance wash cycle, without
any clothing being placed inside of the drum.
o This will check that all aspects of the installation are correct; it will
also remove any deposits that may have been left on the drum by
the manufacturing process.
o Select a 95°C cotton wash.
o A small quantity of detergent should be used during this
maintenance wash.
Error code failure system
If your appliance senses that it is not operating correctly, then an error
code may appear on the LCD display.
The following error codes can possibly be remedied by the customer
and the steps outlined on the next page should be followed.
BEFORE
COMPLETING
APPLIANCE, IT SHOULD BE DISCONNECTED FROM YOUR
POWER SUPPLY.
dryer
has
been
ANY
MAINTAINEANCE
correctly
installed,
ON
we
THE
37
Advertisement
Table of Contents
