12
SERVICE WORK ON THE CHASSIS
12.27
Installing the front right fuel tank
12.28
Checking the chain for dirt accumulation
12.29
Cleaning the chain
Warning
Danger of accidents Oil or grease on the tires reduces their grip.
–
Remove oil and grease with a suitable cleaning material.
Warning
Danger of accidents Reduced braking efficiency due to oil or grease on the brake discs.
–
Always keep the brake discs free of oil and grease, and clean them with brake cleaner when necessary.
Warning
Environmental hazard Hazardous substances cause environmental damage.
–
Oil, grease, filters, fuel, cleaners, brake fluid, etc., should be disposed of as stipulated in applicable regulations.
Info
The service life of the chain depends largely on its maintenance.
Main work
–
Position the fuel tank. Mount and tighten screws
Guideline
Screw, front fuel tank
–
Mount fuel tank breather hose
L02754-11
–
Remove the wash cap set.
–
Clean the plug-in connection
Info
Under no circumstances should dirt enter into the fuel line. Dirt in the fuel
line clogs the injection valve.
–
Lubricate the O-ring and connect plug-in connection of the fuel line.
L02746-12
Finishing work
–
Install the engine guard. (
–
Mount the trim. (
–
Mount the seat. (
–
Check the chain for coarse dirt accumulation.
»
If the chain is very dirty:
–
Clean the chain. (
400678-01
Preparatory work
–
Raise the motorcycle with the lift stand. (
M8
.
of the fuel line thoroughly with compressed air.
p. 68)
p. 67)
p. 55)
p. 60)
p. 44)
.
8 Nm (5.9 lbf ft)
60