Table of Contents
Advertisement
11
TUNING THE CHASSIS
11.13
Adjusting the rebound damping of the fork
Info
The hydraulic rebound damping determines the fork suspension behavior.
11.14
Handlebar position
11.15
Adjusting the handlebar position
Warning
Danger of accidents Handlebar breakage.
–
If the handlebar is bent or straightened it will cause material fatigue, and the handlebar can break. Always replace handle-
bar.
–
Remove protection caps
–
Turn adjusting screws
Info
Adjusting screws
Make the same adjustment on both fork legs.
–
Turn back counterclockwise by the number of clicks corresponding to the fork type.
Guideline
L02723-10
Rebound damping
Standard
Info
Turn clockwise to increase damping; turn counterclockwise to reduce damp-
ing.
–
Mount protection caps
The holes on the handlebar holders are placed at a distance of
Distance
The handlebar supports can be turned by 180°. In this way, the handlebar can be
mounted in the position that is most comfortable for the rider.
The handlebar supports can also be mounted at two different heights (with and without
a spacer).
402384-10
.
clockwise all the way.
are located at the bottom end of the fork legs.
.
3.5 mm (0.138 in)
between holes
20 clicks
from the center.
42
Advertisement
Table of Contents
