Table of Contents
Advertisement
6
CONTROLS
6.1
Clutch lever
6.2
Hand brake lever
6.3
Throttle grip
6.4
Kill switch
6.5
Light switch
The clutch lever
The clutch is hydraulically operated and self-adjusting.
L02711-10
The hand brake lever
The hand brake lever operates the front brake.
L02712-11
The throttle grip
L02712-10
The kill switch
Possible states
•
Kill switch
the engine can be started.
•
Kill switch
ning engine stops, and a non-running engine will not start.
L02713-10
The light switch
Possible states
L02713-11
is fitted on the left side of the handlebar.
is fitted on the right side of the handlebar.
is fitted on the right side of the handlebar.
is fitted on the left side of the handlebar.
in basic position – In this position, the ignition circuit is closed, and
pressed – In this position, the ignition circuit is interrupted, a run-
is fitted on the left side of the handlebar.
Light off – Light switch is turned to the right. In this position, the light
is switched off.
Low beam on – Light switch is in the central position. In this position,
the low beam and tail light are switched on.
High beam on – Light switch is turned to the left. In this position, the
high beam and the tail light are switched on.
13
Advertisement
Table of Contents
