Using The Remote Control - Channel Master DVR+ User Manual

Using the Remote Control

Controlling the Volume for an Audio Device
Follow this procedure to program the Volume (+ and –) buttons
on the remote to control your audio device's volume instead of
your TV's volume.
Note: Before following this procedure, you must first program
your remote to control your audio device, as described on the
previous pages in this section.
1
Press and hold the SETUP button until the OFF/ON button
blinks twice, then release the button.
2
Press the VOL+ button.
3
Press the Green (AUD) button.
4
Press the AUDIO CC button if you'd like to set up audio
options, including closed captions.
If you wish to revert volume control back to your TV, repeat this
procedure and press the Red (TV) button instead of the
Green (AUD) button in step 3.
Controlling the Input for an Audio Device
Follow this procedure to program the INPUT button on the
remote to control your audio device's inputs instead of your TV's
inputs.
Note: Before following this procedure, you must first program
your remote to control your audio device, as described on the
previous pages in this section.
1
Press and hold the SETUP button until the OFF/ON button
blinks twice, then release the button.
2
Press the INPUT button.
3
Press the Green (AUD) button.
If you wish to revert input control back to your TV, repeat this
procedure and press the Red (TV) button instead of the
Green (AUD) button in step 3.
SETUP
AUDIO
CC
SETUP
INPUT
Getting Started ::
13