Software Update
Issues
Parental Control
Issues
If you're manually updating your DVR+ software using a USB
flash-memory drive, you may see one of the following messages
displayed after inserting the drive into a USB port:
•
"EHD Insufficient Disk Size" – Some flash-memory drives have
multiple small partitions, or even zero partitions. Try reformatting
the drive to have a single primary partition, or use a different
flash drive.
•
"A USB download has been detected which is already present on
your device." – Your DVR+ receiver has been updated to the same
version of software as you have on the flash drive. It's up-to-date,
so no further update is needed.
•
"I changed the channel and a Locked Channel message is
displaying requesting the PIN (password)." Parental Control has
been activated and the channel has been locked. See page 28.
•
"I changed the channel and a Parental Lock Activated or Rating
Locked message is displaying requesting the PIN (password)."
The program or event currently on this channel has been locked.
See page 28.
•
"I chose a program or event in the guide and a message is
displayed requesting a PIN (password)." Parental Control has
been activated and the channel or the program or event has been
locked. See page 28.
Troubleshooting ::
37
Need help?
Do you have a question about the DVR+ and is the answer not in the manual?