Dish Network ViP622 User Manual page 136

Message
Possible Reason
Number
You may have aimed the satellite
dish at one satellite, but selected
060
the option for another satellite on
the Point Dish screen.
The receiver is downloading
061
current software.
The receiver gives you three
chances to enter the correct
password. If you fail to do so, the
074
receiver "times out" and will not
allow you to try again for several
minutes.
You may not have connected the
receiver to an active telephone
078, 079,
line or broadband Internet
connection, or the telephone line
080
or Internet connection may be
defective.
You may have selected the Reset
093
Factory Defaults option.
What to Do
• Make sure that you have selected the option for the right
satellite on the Point Dish screen, as described on
page 122.
• Make sure that the cable(s) for the satellite you have
selected is connected to the LNBF that receives signals
from that satellite. Re-aim the satellite dish at the right
satellite.
It is very important for the receiver to get the latest software
to function properly. The download may take several
minutes. Do not disturb or unplug the receiver during this
time.
Wait a few minutes and then try again to enter the password.
Note: The "time out" feature is designed to prevent someone
from trying password after password until he or she happens
to guess the right one and gains unauthorized access to the
receiver.
Connect the receiver to an active telephone line or
broadband Internet connection. Make sure that the
telephone line or Internet connection to which you connect
the receiver is working properly.
To order Pay-Per-View programs, you must keep each
Note:
receiver connected to an active telephone line or broadband
Internet connection. The receiver uses the telephone line to
make toll-free calls (when the phone is not in use) or the
Internet connection to send purchase information to DISH
Network.
IIf you want to reset the receiver to its factory default settings,
select Yes. If you do not want to reset factory defaults, select
No.
Reference
Troubleshooting Tables
127