Ipv6 Basics Configuration Example; Network Requirements - HP 5920 Series Configuration Manual

Task
Display the IPv6 path MTU information.
Display IPv6 and ICMPv6 statistics.
Display brief information for IPv6 RawIP
connections.
Display detailed information for IPv6
RawIP connections.
Display brief information for IPv6 TCP
connections.
Display detailed information for IPv6 TCP
connections.
Display brief information for IPv6 UDP
connections.
Display detailed information for IPv6 UDP
connections.
Display ICMPv6 traffic statistics.
Display IPv6 TCP traffic statistics.
Display IPv6 UDP traffic statistics.
Clear IPv6 neighbor information.
Clear path MTUs.
Clear IPv6 and ICMPv6 packet statistics.
Clear IPv6 TCP traffic statistics.
Clear IPv6 UDP traffic statistics.
For more information about the display tcp statistics command, the display udp statistics command, the
reset tcp statistics command and the reset udp statistics command, see "IP performance optimization
commands."

IPv6 basics configuration example

Network requirements

As shown in
Ethernet ports into corresponding VLANs, configure IPv6 addresses for the VLAN interfaces and verify
that they are connected. Switch B can reach the host.
Enable IPv6 on the host to automatically obtain an IPv6 address through IPv6 ND.
Figure 55, a host, Switch A, and Switch B are connected through Ethernet ports. Add the
Command
display ipv6 pathmtu [ vpn-instance vpn-instance-name ]
{
{ ipv6-address | all | dynamic | static } [ count ] }
display ipv6 statistics [ slot slot-number ]
display ipv6 rawip [ slot slot-number ]
display ipv6 rawip verbose [ slot slot-number [ pcb pcb-index ] ]
display ipv6 tcp [ slot slot-number ]
display ipv6 tcp verbose [ slot slot-number [ pcb pcb-index ] ]
display ipv6 udp [ slot slot-number ]
display ipv6 udp verbose [ slot slot-number [ pcb pcb-index ] ]
display ipv6 icmp statistics [ slot slot-number ]
display tcp statistics [ slot slot-number ]
display udp statistics [ slot slot-number ]
reset ipv6 neighbors { all | dynamic | interface interface-type
interface-number | slot slot-number | static }
reset ipv6 pathmtu { all | dynamic | static }
reset ipv6 statistics [ slot slot-number ]
reset tcp statistics
reset udp statistics
130