Configuration Prerequisites; Configuration Procedure - HP 5920 Series Configuration Manual

DDNS server
PeanutHull
Replace the parameters username and password in the URL with your actual login ID and password
registered at the DDNS service provider's website.
HP and GNUDIP are common DDNS update protocols. The server-name parameter is the domain name
or IP address of the service provider's server using one of the update protocols.
The URL address for an update request can start with:
• http://—The HTTP-based DDNS server.
https://—The HTTPS-based DDNS server.
•
ods://—The TCP-based ODS server.
•
• gnudip://—The TCP-based GNUDIP server.
oray://—The TCP-based DDNS server.
•
members.3322.org and phservice2.oray.net are the domain names of DDNS servers. The domain
names of PeanutHull DDNS servers can be phservice2.oray.net, phddns60.oray.net, client.oray.net,
ph031.oray.net, and so on. Determine the domain name in the URL according to the actual situation.
The system automatically fills <h> with the FQDN upon a DDNS policy application to the interface and
automatically fills <a> with the primary IP address of the interface to which the DDNS policy is applied.
You can also manually specify an FQDN and an IP address in <h> and <a>. In this case, the FQDN
specified upon the DDNS policy application does not take effect. You are not encouraged to manually
change the <h> and <a> for your configuration may be incorrect. For more information about applying
DDNS policies, see
TIP:
The FQDN is the only identification of a node in the network. An FQDN consists of a local host name and
a parent domain name and can be translated into an IP address.

Configuration prerequisites

Visit the website of a DDNS service provider, register an account, and apply for a domain name for the
DDNS client. When the DDNS client updates the mapping between the domain name and the IP address
through the DDNS server, the DDNS server checks whether the account information is correct and
whether the domain name to be updated belongs to the account.

Configuration procedure

To configure a DDNS policy:
Step
1. Enter system view.
2. Create a DDNS policy and enter
its view.
3. Specify a URL address for DDNS
update requests.
URL addresses for DDNS update requests
oray://username:password@phservice2.oray.net
"Applying the DDNS policy to an
Command
system-view
ddns policy
policy-name
url request-url
interface."
Remarks
N/A
By default, no DDNS policy is created.
By default, no URL address is specified for
DDNS update requests.
95