Troubleshooting Ipv6 Basics Configuration; Symptom; Solution - HP 5920 Series Configuration Manual

1 packet(s) transmitted, 1 packet(s) received, 0.0% packet loss
round-trip min/avg/max/std-dev = 4.404/4.404/4.404/0.000 ms
[SwitchB] ping ipv6 -c 1 2001::15B:E0EA:3524:E791
PING6(104=40+8+56 bytes) 3001::2 --> 2001::15B:E0EA:3524:E791
56 bytes from 2001::15B:E0EA:3524:E791, icmp_seq=0 hlim=64 time=5.404 ms
--- 2001::15B:E0EA:3524:E791 ping6 statistics ---
1 packet(s) transmitted, 1 packet(s) received, 0.0% packet loss
round-trip min/avg/max/std-dev = 5.404/5.404/5.404/0.000 ms
The output shows that Switch B can ping Switch A and the host. The host can also ping Switch B and
Switch A.

Troubleshooting IPv6 basics configuration

Symptom

An IPv6 address cannot be pinged.

Solution

Use the display ipv6 interface command in any view to verify that the IPv6 address of the output
1.
interface is correct and the interface is up.
Use the debugging ipv6 packet command in user view to enable the debugging for IPv6 packets
2.
to locate the fault.
135