Verifying The Configuration - HP 5920 Series Configuration Manual

Verifying the configuration

# Use the display dhcp client command to display the IP address and other network parameters assigned
to Switch B.
[SwitchB] display dhcp client verbose
Vlan-interface2 DHCP client information:
Current state: BOUND
Allocated IP: 10.1.1.3 255.255.255.0
Allocated lease: 864000 seconds, T1: 331858 seconds, T2: 756000 seconds
Lease from May 21 19:00:29 2012
DHCP server: 10.1.1.1
Transaction ID: 0xcde72232
Classless static routes:
Destination: 20.1.1.0, Mask: 255.255.255.0, NextHop: 10.1.1.2
DNS servers: 20.1.1.1
Client ID: 3030-3063-2e32-3964-
T1 will timeout in 3 days 19 hours 48 minutes 43 seconds
# Use the display ip routing-table command to display the route information on Switch B. The output
shows that a static route to network 20.1.1.0/24 is added to the routing table.
[SwitchB] display ip routing-table
Destinations : 16
Destination/Mask
0.0.0.0/32
10.1.1.0/24
10.1.1.0/32
10.1.1.3/32
10.1.1.255/32
20.1.1.0/24
127.0.0.0/8
127.0.0.0/32
127.0.0.1/32
127.255.255.255/32
224.0.0.0/4
224.0.0.0/24
255.255.255.255/32
332e-3836-3539-2d45-
7468-302f-302f-32
Routes : 16
Proto Pre
Direct 0
Direct 0
Direct 0
Direct 0
Direct 0
Static 70
Direct 0
Direct 0
Direct 0
Direct 0
Direct 0
Direct 0
Direct 0
to May 31 19:00:29 2012
Cost NextHop
0 127.0.0.1
0 10.1.1.3
0 10.1.1.3
0 127.0.0.1
0 10.1.1.3
0 10.1.1.2
0 127.0.0.1
0 127.0.0.1
0 127.0.0.1
0 127.0.0.1
0 0.0.0.0
0 0.0.0.0
0 127.0.0.1
60
Interface
InLoop0
Vlan2
Vlan2
InLoop0
Vlan2
Vlan2
InLoop0
InLoop0
InLoop0
InLoop0
NULL0
NULL0
InLoop0