Using The Features - AT&T 8102 User Manual

Using the Features

The procedures which follow give short, step-by-step instructions for
using each feature. For your convenience, features are listed
alphabetically.
Note: At the end of this booklet is a one-page Quick Reference Guide
which allows you quick access to procedures for many of the telephone
features. You can remove this page from the manual (tear along the
perforation), and keep it near your telephone.
Important: If your telephone does not respond to any button presses or
if it sounds dead, refer to the procedures in Appendix D.
Using the Handset and Speakerphone
For most features you must lift the handset (go off-hook) before you can
use a feature. However, if you are using an 8110 telephone, you may
choose to leave your handset (on-hook, that is, leave the handset on the
telephone cradle) and use your built-in speakerphone instead.
Note: The 8102 telephone has an Adjunct jack on the rear of the
telephone so that you can use an externally added speakerphone, such
as the AT&T S201A Speakerphone.
Answering and Placing a Call
To answer a call
1
Pick up handset
2
Speak to other party
To answer a call using the speakerphone (for 8110 users)
1
When you hear the telephone ring, press [
Red light next to [
Speak to other party
2
To place a call
1 Pick up handset
Dial desired number
2
] goes on
Spkr
[dial tone]
21
]
Spkr