AT&T 8102 User Manual page 19

Base
FIGURE 7 Placing the Telephone on the Wall Jack Mounting Studs
6
Plug one end of the line cord into the line jack on the bottom of the
telephone. See Figure 8 for the location of the line jack.
Note: You may prefer to use an 8" line cord rather than the 7-foot
cord provided with the telephone. If you use the 7-foot cord, you will
need to place it into the back of the telephone in its original coiled
position.
7
Plug the free end of the line cord into the modular wall jack.
See Figure 8.
FIGURE 8 Connecting the Line Cord to the Modular Jack and the Line Jack
Line jack
Telephone
16
Mounting
studs
Line cord
Base
Modular
jack