AT&T 8102 User Manual page 31

To dial a number with a programmable dialing button
Pick up handset
1
o r
if you are using an 8110 telephone, you can press [
When you hear dial tone, press appropriate programmable dialing
2
button
Number programmed on the button is automatically dialed
To erase a number stored on a programmable dialing button
1 Press the PROGRAM button
2
Press button to be cleared twice
3
Press the PROGRAM button
or
lift handset
Redial (With Auto-Pause)
The Redial feature automatically redials the last number you dialed from
the dial pad, either an extension or an outside number. Use to save time
in redialing a busy or unanswered number. The number you redial can
be up to 20 digits.
The Auto-Pause feature can automatically insert pauses after a dial
access code (such as, 9) in a redialed number. If you usually wait a
short period to obtain a second dial tone after dialing an access code,
you can set the waiting time needed by the Redial feature by
programming the Auto-Pause feature as described below.
To automatically redial the last number dialed from the dial pad
1 Pick up handset
or
if you are using an 8110 telephone, you can press [
2 Press [
Redial
Number is automatically redialed
Note: You will hear a rapid error tone if the dialed number is longer
than 20 elements.
]
28
]
Spkr
] [dial tone]
Spkr