AT&T 8102 User Manual page 13

Mute button
(On the 8110 only)
Message light
Dial pad
Handset jack
Speaker button
(On the 8110 only)
Flash button
Program button
The SIDE VIEW shows the following features:
Tone Selector
(HI or LO)
Tone Selector
(FAST or SLOW)
Ringer Volume control
Speaker volume control
(On the 8110 only)
For turning off the microphone associated
with the handset or the built-in
speakerphone.
A red light that flashes when a message has
been left for you.
The standard 12-button pad for dialing
telephone numbers. The dial pad is also
used with the PROGRAM button to store
numbers on the Programmable Dialing
buttons.
For connecting the handset to your
telephone.
For accessing the built-in speakerphone and
microphone combination.
For using features such as Conference with
business communications systems, and for
custom calling features if you are using your
telephone at home.
For storing telephone numbers on the
programmable dialing buttons on the front of
your telephone.
For selecting one of 2 tone ringer
frequencies (high or low).
For selecting one of 2 tone ringer
modulation rates (fast or slow).
A 3-position switch to control the volume for
the tone ringer. Slide it up (away from you)
for a louder ring, down (toward you) for a
quieter ring. The volume control is
labeled
Ringer Vol
For raising or lowering the volume of the
built-in speakerphone. The volume control
is labeled
Speakerphone Vol
10
.
.