AT&T 8102 User Manual page 22

Removing and Covering the Auto Answer Button
If you are have an 8110 telephone, you may want to disable the Auto
Answer button ([
Follow this procedure to remove the Auto Answer button and cover the
opening from which you removed the button.
Note: To complete this procedure, you will need the slot cover which is
shipped in the box with the telephone. You may also need a pair of
needlenose pliers.
Press [
1
Auto
Lift the button from its slot on the face of the telephone. (You will
2
probably want to use a set of needlenose pliers for this task.)
See Figure 11.
Take the slot cover (provided with the telephone) and place it in a
3
horizontal position in the empty slot. See Figure 11. Be sure that
the cap is snug with the face of the telephone.
]) so that it cannot be activated accidentally.
Auto
] so that the button is in the "up" position
19