Wall Installation - AT&T 8102 User Manual

Wall Installation

Use the following directions to mount the telephone on a standard
wallphone jack with mounting studs.
1 You must reverse the handset tab (which holds the handset when
you hang up). See Figure 5.
Hold down the switchhook and slide the tab up and out of its slot.
Turn the tab so that the curved end is facing up.
Insert the tab back into its slot.
a. Handset retainer
in place
c. Rotate handset
retainer 180 degrees.
180°
FIGURE 5 Rotating the Handset Tab
b. Release and
remove handset
retainer.
d. Replace handset
retainer.
14