Battery Charging; Low Battery Indication - Yaesu FT-252 Operating Manual

Installation of Accessories
If the battery has never been used, or its charge is depleted, it may be charged by con-
necting the SAD-11B or PA-48 AC Wall Charger, as shown in the illustration, to the
EXT DC jack. If only 12 ~ 14 Volt DC power is available, the optional SDD-11 DC/DC
Converter (with its cigarette lighter plug) or E-DC-6 DC Cable may also be used for
charging the battery.
The display will indicate "CHRG", while the battery is being charged. When charging is
completed, the "CHRG" indication disappears from the display.
A fully-discharged pack will be charged completely in 5 hours. Disconnect the SAD-
11B or PA-48 from the EXT DC jack and the AC line outlet.
Important Note
 The SAD-11B and PA-48 is not designed to power the transceiver for operation (re-
ception or transmission).
 Please be advised that the SAD-11B and PA-48 may contribute noise to TV and ra-
dio reception in the immediate vicinity, so we do not recommend its use adjacent to
such devices.
When the battery charge is almost depleted, a "
When the " " icon appears, it is recommended that you charge the battery soon.
No Icon: Sufficient Operating Battery Power
: Lower Battery Power
(Blinking): Prepare to charge (or replace) the Battery
6

Battery Charging

CD-57
(option)

Low Battery Indication

" icon will appear on the display.
FT-252 O
peraTing
M
anual