Deleting Memories; Memory Bank Operation - Yaesu FT-252 Operating Manual

Table of Contents

Advertisement

Memory Mode
You may delete any of the memories (except for Memory Channel "1" and the Home
Channel). The procedure for deleting a channel is quite simple.
1. Press the [ V/M ] key, if needed, to enter the VFO mode.
2. Press and hold in the [ F/MW ] key for one second, then rotate the DIAL knob or
press the [ p ] / [ q ] key to select the memory channel to be deleted.
3. Press the [ SET/ATS ] key for one second. The display will revert to memory chan-
nel #1. The previously-selected memory will be deleted.
Important Notice! Once deleted, the channel data cannot be recovered!
The large number of memories available in the FT-252 could be difficult to utilize
without some means of organizing them. Fortunately, the FT-252 includes provision for
dividing the memories into as many as ten Memory Groups, so you can categorize the
memories in a manner convenient to you.
Assigning Memories to a Memory Bank
1. Recall the memory channel to be assigned to a Memory
Bank.
2. Press and hold in the [ V/M ] key for one second, then ro-
tate the DIAL knob or press the [ p ] / [ q ] key to select the
Memory Bank number you want as the Memory Bank for
this channel ("
BANK 1
3. Press and hold in the [ F/MW ] key for one second to copy
the memory channel data into the Memory Bank.
1) You may assign the same memory channel into multiple Memory Banks.
2) The PMS memory channels (L1/U1 through L10/U10) may not be assigned to a Memory Bank.
Memory Bank Recall
1. Press the [ V/M ] key, if needed, to enter the Memory Recall mode.
2. Press and hold in the [ V/M ] key, then rotate the DIAL
knob or press the [ p ] / [ q ] key to select the desired Mem-
ory Bank ("
BANK 1
3. Press the [ V/M ] key momentarily; now, as you rotate the
DIAL knob or press the [ p ] / [ q ] key to select memories,
you will observe that you can only select memory chan-
nels in the current memory bank. The "
will appear at the left side of the frequency display while
operating within a Memory Bank.
26

Deleting Memories

Memory Bank Operation

" ~ "
").
BANK10
" through "
BANK10
").
" indication
FT-252 O
M
peraTing
anual

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ft-257

Table of Contents