Specifications - Yaesu FT-252 Operating Manual

General
Frequency Ranges:
Channel Steps:
Frequency Stability:
Repeater Shift:
Emission Type:
Antenna Impedance:
Supply Voltage:
(Negative Ground)
Current Consumption:
(Approx. @7.4 V)
Operating Temperature: –4º to 140º F (–20 °C to +60 °C)
Case Size:
Weight:
Transmitter
RF Power Output:
Modulation Type:
Maximum Deviation:
Spurious Emission:
Microphone Impedance: 2 k
Receiver
Circuit Type:
Sensitivity:
Selectivity:
AF Output:
Specifications are subject to change without notice, and are guaranteed within the
144 MHz amateur band only. Frequency ranges and functions will vary according to
transceiver version; check with your dealer.
FT-252 O
peraTing
RX 136 - 174 MHz
TX 144 - 146 (148) MHz
5/10/12.5/15/20/25/100 kHz
±5 ppm @ 14º to 140º F (–10° to +60° C)
±600 kHz
F2 , F3
50 
Nominal: 7.4 V DC
Operating: 5.0 ~ 10.0 V DC (EXT DC Jack)
200 mA (Receive, 200 mW output)
70 mA (Standby, Saver Off)
25 mA (Standby, Saver On)
0.5 mA (Auto Power Off)
1.6 A (5 W TX)
2.45" (W) x 4.74" (H) x 1.52" (D) (62 x 120.5 x 38.5 mm)
(W/O knob, antenna, & belt clip)
9.9 Oz (280 g) with FNB-124LI, antenna, and belt clip
5.0 W (High) / 2.0 W (Middle) / 0.5 W (Low) (@7.4 V)
Variable Reactance F2, F3
±5.0 kHz (F2, F3)
At least 60 dB down (@ High and Middle power)
At least 40 dB down (@ Low power)
Direct-Conversion
0.2 µV for 12 dB SINAD (144-146 MHz)
12 kHz/35 kHz (–6 dB /–60 dB)
800 mW @ 16  for 10 % THD (@ 7.4 V) (Internal Speaker)
M
anual

Specifications

63