Yaesu FT-252 Operating Manual page 60

Set ( Menu ) Mode
Set Mode Item 21 [ LAMP ]
Function: Selects the LCD/Keypad Lamp mode.
Available Values: KEY/CONT/OFF
Default: KEY
KEY: Illuminates the Keypad/LCD lamp for five seconds when you rotate the DIAL
knob or press the keypad or any switch (except PTT switch). This is the facto-
ry-programmed default setting.
CONT: Illuminates the Keypad/LCD lamp continuously.
OFF: Disables the Keypad/LCD lamp.
Set Mode Item 22 [ LOCK ]
Function: Selects the Control Locking lockout combination.
Available Values: LK KEY/LKDIAL/LK K+D/LK PTT/LK P+K/LK P+D/LK ALL
Default: LK K+D
Note: "K" = "Key;" "D" = "Dial;" and "P" = "PTT."
Set Mode Item 23 [ M/TCAL ]
Function: Selects the [ VOL/SQL ] key function.
Available Values: MONI/T-CALL
Default: Depends on the transceiver version.
MONI: Pressing the [ VOL/SQL ] key causes the Noise/Tone Squelch to be over-
ridden, allowing you to listen for weak (or non-encoded) signals.
T-CALL: Pressing the [ VOL/SQL ] key activates a 1750-Hz burst tone, used for repeater
access in many countries (especially in Europe).
Set Mode Item 24 [ MEM.TAG ]
Function: Stores Alpha-Numeric "Tags" for the Memory channels.
See page 24 for details.
Set Mode Item 25 [ NAME ]
Function: Toggles the display indication between "frequency" and the channel's "Alpha/
Numeric Tag."
Available Values: FREQ/ALPHA
Default: FREQ
Set Mode Item 26 [ PASSWD ]
Function: Enables/disables the Password feature.
Available Values: PWD.OFF/PWD. ON
Default: PWD.OFF
Set Mode Item 27 [ PSWD W ]
Function: Stores the password.
Available entries are 0-9, A, B, C, D, E, and F.
58 FT-252 O
peraTing
M
anual