Controls & Connections; Top & Front Panel; Lcd - Yaesu FT-252 Operating Manual

Antenna Jack

Connect the supplied rubber flex antenna (or an-
other antenna presenting a 50-Ohm impedance)
here.
DIAL Knob

The main tuning Dial is used to set the operating
frequency. It is also used for menu selections and
other adjustments.
Speaker

The internal speaker is located here.
PTT (Push To Talk) Switch

Press this switch to transmit, and release it (to receive) after your transmission is
completed.
LCD (Liquid Crystal Display)

The display shows the current operating conditions, as described on the next page.
Keypad

These 9 keys select many of most important operating features on the FT-252 .
MIC

The internal microphone is
located here.
EXT DC Jack
ˆ
This coaxial DC jack allows
connection to an external DC
power source (5-10V DC).
The center pin of this jack is
the Positive (+) connection.
Do not allow the FT-
252 to become sub-
merged in water while the
rubber cap over the EXT DC
jack is removed.
FT-252 O
peraTing
Controls & Connectors




M
anual
 

ˆ
3