CTCSS/DCS Operation
The FT-252 can be operated in a Split Tone configuration via the Set mode.
1. Press the [ SET/ATS ] key to enter the Set mode.
2. Rotate the DIAL knob or press the [ p ] / [ q ] key to select
Set Mode Item 39:
3. Press the [ SET/ATS ] key momentarily to enable adjust-
ment of this Item.
4. Rotate the DIAL knob or press the [ p ] / [ q ] key to select
Tone feature).
5. Press the PTT switch momentarily to save the new setting and exit to normal operation.
When the Split Tone feature is activated, you can see the following additional param-
eters following the "
40:
):
SQL.TYP
:
DCS Encode only (the "
D
: Encodes a CTCSS Tone and Decodes a DCS code
T DCS
(the " " icon will blink and the "
: Encodes a DCS code and Decodes a CTCSS Tone
D TSQL
(the "
tion)
Select the desired operating mode from the selections shown above.
20
Split Tone Operation
.
SPLIT
" parameter (while selecting the tone mode by Set Mode Item
DCS
" icon will appear and the "
" icon will appear during operation)
" icon will appear during operation)
" icon will blink during opera-
FT-252 O
(to enable the Split
ON
M
peraTing
anual