Memory Recall; Home Channel Memory - Yaesu FT-252 Operating Manual

1. While operating in the VFO mode, press the [ V/M ] key to
enter the Memory mode.
2. Rotate the DIAL knob or press the [ p ] / [ q ] key to select
the desired memory channel.
3. To return to the VFO mode, press the [ V/M ] key.
A special one-touch "HOME" channel is available, to allow quick recall of a favorite
operating frequency.
Home Channel storage is simple to accomplish:
1. Change the setting of Set Mode Item 30:
not already set to this option (see page 59).
2. Select the desired frequency, while operating in the VFO mode. Be sure to set up
any desired CTCSS or DCS tones, as well as any desired repeater offset. The power
level may also be set at this time, if you wish to store it.
3. Press and hold in the [ F/MW ] key for one second.
4. While the memory channel number is blinking, just press the [ REV ] key. The fre-
quency and other data (if any) will now be stored in the
special HOME channel register.
5. To recall the HOME channel, press the [ REV ] key mo-
mentarily while operating either in the VFO or MR mode.
FT-252 O
peraTing

Memory Recall

HOME Channel Memory

M
anual
Memory Mode
/ from "
REV HM REV
" to " ," if it is
HOME
23