Ctcss/Dcs Bell Operation - Yaesu FT-252 Operating Manual

Table of Contents

Advertisement

9. Rotate the DIAL knob to select the
desired DCS Code (a three-digit num-
ber). Ask the repeater owner/operator if
you don't know DCS Code; if you are
working simplex, just set up the DCS
Code to be the same as that used by
your friend(s).
10. When you have made your selection,
press the [ SET/ATS ] key, then press
the PTT switch to save the new set-
tings and exit to normal operation.
Remember that the DCS is an Encode/Decode system, so your receiver will remain
muted until a matching DCS code is received on an incoming transmission. Switch
the DCS off when you're just tuning around the band!
During CTCSS Decode or DCS operation, you may set up the FT-252 such that a ring-
ing "bell" sound alerts you to the fact that a call is coming in. Here is the procedure for
activating the CTCSS/DCS Bell:
1. Set the transceiver up for CTCSS Decode ("Tone Squelch") or DCS operation, as
described previously.
2. Adjust the operating frequency to the desired channel.
3. Press the [ SET/ATS ] key to enter the Set mode.
4. Rotate the DIAL knob or press the [ p ] / [ q ] key to select
Set Mode Item 8:
5. Press the [ SET/ATS ] key momentarily to enable adjust-
ment of this Item.
6. Rotate the DIAL knob or press the [ p ] / [ q ] key to set the desired number of rings of
the Bell. The available choices are "
or "
" rings,
8 T
7. Press the PTT switch momentarily to save the new setting
and exit to normal operation.
When you are called by a station whose transceiver is sending
a CTCSS tone or DCS code which matches that set into your
Decoder, the Bell will ring in accordance with this program-
ming. When the CTCSS/DCS Bell is activated, the " " icon
will appear at the upper right corner on the LCD.
FT-252 O
peraTing
DCS Operation

CTCSS/DCS Bell Operation

.
BELL
(continuous ringing), or
CONT
M
anual
CTCSS/DCS Operation
023 025 026 031 032 036 043 047 051 053
054 065 071 072 073 074 114 115 116 122
125 131 132 134 143 145 152 155 156 162
165 172 174 205 212 223 225 226 243 244
245 246 251 252 255 261 263 265 266 271
274 306 311 315 325 331 332 343 346 351
356 364 365 371 411 412 413 423 431 432
445 446 452 454 455 462 464 465 466 503
506 516 523 526 532 546 565 606 612 624
627 631 632 654 662 664 703 712 723 731
732 734 743 754 –
," "
," "
1 T
3 T
5 T
.
OFF
DCS CODE
,"
19

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ft-257

Table of Contents