Component Video Output; Subwoofer Output - Jensen JiTS-300i User Manual

COMPONENT VIDEO OUTPUT

1. Securely dock your iPhone or iPod with video.
2. Connect one end of a component video cable (not included) to COMPONENT OUT
jacks on the rear of the unit. Make sure the color codes of the plugs are correct to the
connectors.
3. Connect the other end of the cable to
video display.
4. Set the connected television or video display to the Component Video input mode
and make sure the docked iPhone or iPod's TV out option is turned on.
5. Press VIDEO button on the remote to switch to Component video output mode.
6. Video from a docked iPhone/iPod can now be played through the bar speaker to the
connected television or video display.
Note: 1. The Component Video Output jacks only works at iPod mode. It cannot output
video from the A/V input mode.
th
2. iPod 5 gen does not support component video out.
1. Connect the A/V input jacks on the rear of unit to A/V output jacks of external source
with the audio & video RCA cable (included). For example, DVD player. Make sure
the color codes of the plugs are correct to the connectors.
2. Connect one end of an RCA video cable (not included) to VIDEO OUT jack on the
rear of the unit.
3. Connect the other end of the video cable to VIDEO IN of your television or video
display.
4. Press the POWER button to turn the unit on.
5. Press the SOURCE button repeatedly to switch to A/V input mode, "AV" message
shows on the display.
6. Use the native controls on the connected audio & video device to begin playing video
through the connected the unit.
7. It will input audio source through the Audio Right & Left Jacks of the A/V Jacks to the
unit following above instructions.
8. Video from the connected DVD player or the like can now be played through the unit
to the connected television.
Note: Video out of external A/V input only works at Composite Video Output jacks
The unit comes with a built-in subwoofer and allows you to output the subwoofer signal
to an external amplifier (such as a 2.1CH amplifier or a 2.1CH micro system) via the
SUB OUTPUT jack on the rear of the unit. Follow the below steps to connect the
COMPONENT
VIDEO OUT FROM A/V INPUT

SUBWOOFER OUTPUT

8
VIDEO IN of your television or
.