Service Manual
Drive Unit and Optical Unit Removal
3.2.6
This section describes how to remove the drive unit and the optical unit.
3.2.6.1 Drive Unit Removal
Remove the rear cover. (Refer to Section
1.
2. Remove the top cover. (Refer to Section
3. Remove the left cover. (Refer to Section
Remove the
4.
5. Remove the ELEC cover. (Refer to Section
6. Remove the fusing unit. (Refer to Section
7.
connector
8. Remove 3
screws
remove it.
Rev.
(Refer to Section 3.2.l.4.)
from theengine driver board
x 29) and
Figure 3-46. Removing the Drive Unit
Disassembly and Assembly
screw
12) securing the drive unit, and
x
board).
3-29