Electrical Component Removal - Epson EPL-9000 Service Manual

Disassembly and

3.2.2 Electrical Component Removal

section describes how to remove the
(MCU high voltage supply board (l-lVPS), low voltage supply unit
fan unit.
3.2.2.1 Cover Removal
1. Remove the rear cover. (Refer
Remove the top cover. (Refer to Section
2.
3. Remove theleftcover. (Refer to Section 3.2.13.)
4. Remove the right cover. (Refer to Section
5. Remove 18 screws
and
6.
7.
Remove 8 CB screws
remove it.
3-6
x 6) securing the shield cover, and remove it.
Figure Removing the Shield Cover
3-5.
from the MAIN board.
x 6) and 2 CBB screws
Figure 3-6. Removing the
cover, MAIN bead,
x 8) securing the
Cover
Service Manual
controller board
earth plate, and
cover, and
Rev.
.>..