Table of Contents
Advertisement
10
Appliance Setup
A. Remove Fixed Glass Assembly
WARNING! Risk of Asphyxiation! Handle fixed glass
assembly with care. Inspect the gasket to ensure it is
undamaged and inspect the glass for cracks, chips or
scratches.
• DO NOT strike, slam or scratch glass.
• DO NOT operate fireplace with glass removed, cracked,
broken or scratched.
• Replace as a complete assembly.
1. Remove safety barrier.
2. Remove front casting by lossening thumb screw at bottom
of casting, slide bottom of casting away from appliance.
!
RISK OR INJURY - CASTING IS VERY HEAVY. HANDLE WITH CARE.
3. Using a #2 phillips bit, remove three fasteners from the top
of the glass frame assembly. See Figure 10.2. Remove
glass from appliance.
TOP CASTING
Figure 10.1 Remove Casting
50
Quadra-Fire • TOPAZ-MBK-IPI, TOPAZ-D-PMH-IPI, TOPAZ-D-MBK-IPI, TOPAZ-D-CSB-IPI Installation Manual • 2341-980_R10 • 11/15
CAUTION
FRONT CASTING
SAFETY BARRIER
PHILLIPS SCREWS
Figure 10.2 Remove Glass Frame
B. Remove the Shipping Materials
Remove shipping materials from inside or underneath the
firebox.
C. Clean the Appliance
Clean/vacuum any sawdust that may have accumulated
inside the firebox or underneath in the control cavity.
Hide quick links:
Advertisement
Table of Contents
