Quadra-Fire TOPAZ-MBK-IPI Installation Manual page 28

Coaxial to Colinear Venting
The coaxial to colinear adapter (DV-46DVA-GCL) is
approved for installations into solid fuel masonry or factory
built fireplaces that have been installed in accordance with
the National, Provincial, State and local building codes.
INLET AIR VENT PIPE
Figure 4.29 Coaxial/Colinear Appliance Connector
WARNING! Risk of Fire! Coaxial to colinear venting
configuration may only be used in existing non-
combustible chimney. Installation in any other venting
application could cause fire.
CAUTION! DO NOT use any flue restrictor when
venting with the DV-46DVA-GCL adapter and LINK-
DV30B kit. This may result in poor flame appearance,
sooting, pilot malfunction, or overheating.
WARNING! Risk of Fire, Explosion or Asphyxiation!
Do NOT connect this gas appliance to a chimney flue
serving a separate solid fuel or gas burning appliance.
• May impair safe operation of this appliance or other
appliances connected to the flue.
• Vent this appliance directly outside.
• Use separate vent system for this appliance.
28 Quadra-Fire • TOPAZ-MBK-IPI, TOPAZ-D-PMH-IPI, TOPAZ-D-MBK-IPI, TOPAZ-D-CSB-IPI Installation Manual • 2341-980_R10 • 11/15
EXHAUST VENT PIPE