Engine Installation - GREAT PLANES ESCAPADE MX 30cc Instruction Manual

❏
9. Mount the ESC. Connect the wires from the ESC to the
motor wires.
❏
10. Make two battery straps from the supplied hook and
loop material.
❏
11. Install the battery straps on the battery tray.
❏
12. Install the battery tray.
❏
13. Connect an 8" [200mm] servo extension to the ESC.
❏
14. Make two straps from the remaining hook and loop
material. Install the receiver, reciever switch and receiver battery.
❏
15. Plug the ESC into the receiver. Check that the throttle
is set to reverse on the Futaba transmitter. Plug the motor
batteries into the ESC. Check that the motor turns counter-
clockwise.
Skip to Install the Cowl.
Gas Engine Installation
❏
1. Drill the fi rewall for your engine.
❏
2. Install the pivot ball on the throttle and choke arm.
18