Flap Servo Installation (Optional) - GREAT PLANES ESCAPADE MX 30cc Instruction Manual

Flap Servo Installation (Optional)

Flaps are not necessary to land the 30cc Escapade. However,
if you have never fl own with fl aps, the 30cc Escapade is a
great plane to learn with.
❏
1. Install a servo lead extension (not included).
❏
2. Install grommets and eyelets in the fl ap servo .
❏
3. Remove the covering from fl ap servo opening.
❏
4. Separate the fl ap from the aileron.
❏
5. Install the fl ap servo following the same procedure used
to install the aileron servos.
❏
6. Install the fl ap servo in the right wing. The two fl ap
servos are connected with a Y-harness and plugged into the
fl ap channel on the receiver.
❏
7. Install the nylon wing dowels.
9