JUKI IP-100 Engineer's Manual page 91

5) Vector form data (Custom pattern data)
1. The custom pattern created with the panel can be stored as the vector form data.
2. The same custom pattern can be used with other sewing machines by downloading the vector form data
which has been stored.
3. The vector form data created with PM-1 can be can be downloaded as the custom pattern.
4. The vector form data which has been stored can be edited with PM-1.
Communication screen (Download of vector form)
Folder structure of vector form (* .VDT) file in the smart media
Upload : Uploading to the smart media is written in the folder of "VDATA".
In case there is no folder, the folder of "VDATA" is automatically created.
Download : Downloading from the smart media is read from the folder of "VDATA".
When creating the pattern with PM-1, store it in the folder of "VDATA".
1 Create folder "VDATA" in the smart media.
(It is not necessary to create the folder when it already exists.)
2 Copy the file (extension VDT).
Smart media
87
− −
PROG
SC915
VDATA
VD00001.VDT
VD00099.VDT